(Mechanical Optical Switch) 1x2 Mechanical Fiber Optic Switch connects optical channels by redirecting 1 incoming optical signals into 2 output fibers. It is achieved by shift the fiber or optical component. This design can significantly offer high stability as well as an unmatched low cost.
l Low Insertion Loss.
l Monolithic Package.
l Cost-Effective.
l Epoxy-free on Optical Path.
l Latching or Non-Latching.
l Telcordia GR-1221 Qualified.
Functional Parameter
Parameter
Min.
Typical
Max.
Central Wavelength (nm)
1310, 1550, 1310 and 1550
Bandwidth (nm)
100nm
Insertion Loss (dB)
0.8
Switch time（ms）
10
Shift Speed（Hz）
Crosstalk (dB)
60
Voltage(V)
3~5.5
Repeatability (dB)
±0.02
Durability
10 million
Return Loss(dB)
50
Polarization Dependent Loss (dB)
0.10
Transmission Power (mW)
300
Operating Temperature(℃)
-5~70
Storage Temperature（℃）
-40~85
Fiber Type
Corning SMF 28e+ or equal（Customized）
Fiber Length（m）
≥1.0（Customized）
Dimension(mm)
28x13x8
Electronic pins structure Non-latching
optical path
condition
PIN1
PIN10
PIN3-2
PIN3-4
PIN8-9
PIN8-7
1-3
GND
+5v
OPEN
CLOSE
1-2
N/A
Latching
circuit driver
PIN5
PIN6
l Route Fiber Test System
l Re-Configurable OADM
l Network Restoration
l Network Protection
l Network Monitoring