Product parameters
Keywords :
Product description
XDK-E8068U(4FE+2POTS+1CATV+WIFI) is anEPON user terminal,which meets the SOHO broadband access ,FTTH broadband speed ,FFTH/FTTDof cable-television operator.The equipment based on mature, stable,cost-effective Gigabit EPON technology combines Gigabit Ethernet switchingtechnology, CATV, WDM, and high-quality VoIP technology. It has highreliability, ease of administration and good QOS. The technology performancemeets the IEEE802.3ah, China Telecom EPON equipment technical requirements(V2.1) specification requirements.

1Special Features
1.1Data service function
  • Full speed without blockingexchange
  • 8K MACaddress table
  • SupportFull Range VLAN ID
  • Support QinQ VLAN1:1VLANVLAN Trunk etc.
  • Support portmonitor, port mirror ,port speed limit ,port SLA etc.
  • QoS based on interface,IEEE802.1p,IPV4(ToS),Diff-Serv,IPV6,802.1Q VLANID,destination MAC or source MAC.
  • The Ethernet interfaces according to thespecifications of the IEEE802.3.
  • 128-bit AES encryption algorithm.
  • According to 802.1x remote management and userauthentication
  • Support WiFi function.
1.2Telephone service function
  • Support SIP protocolH.248 protocolH.323 optional.
  • Support ITU-T G.711G.723.1G.729 compression algorithm
  • Echo cancellation meets ITU-T G.168-2002. echo cancellation for thelongest is 128ms.
  • Support OSPF,T38.
  • Support RFC2833 and RFC2833 redundant,distinctive ringing ,MD5certificate,call forwarding,call waiting,telephone hotline,alarm clock,abbreviateddialing and etc.
  • Support two POTS interface three-way calling,three-way calling supportlocal mixing.
  • Support POTS GR909 line test function.
  • Support dynamic PPPoE,dhcp and static IP.
  • Support CTC2.1 standard
  • 7×24h call lose0.01%
2Product specifications
Item Parameter specification
Optical interface specification Transmission rate
  • Downstream1.25 Gbps
  • Upstream1.25 Gbps
Optical specifications
  •  Downstream
Minimum receiver sensitivity-27dBm
Receive saturation power-3dBm
  • Upstream
  Minimum output optical power0dBm
Number of users can be connected Up to 32 users within 20km.
E8068U connector SC/APC
Optical physical conditions
  • IEEE802.3-2005
  • 1000 BASE-PX20+
Optical fiber G.652 single-mode fiber
Ethernet interface specification standard
  • IEEE802.3
  • IEEE802.3au
  • IEEE802.3x
Port number 4 FE
Connector type RJ-45
impedance 100 Ohm
  • IEEE 802.3
  • 10/100BASE-T,
  • Automated negotiation
  • Full duplex/Half duplex
  • Support RJ-45 MDI/MDIX
Support the connection distance Up to 100 meters
WLAN Compliant with IEEE802.11b/g/n
CATV interface specification Receiving wavelength range 1550±10nm
light reflection loss >45dB
input power range +2dBm-8dBm
RFinterface specification Operation bandwidth 451000MHz
RF output level 80dBuV
RF dB ±1.5 dB
RF output reflection loss 14dB
E8068U Power consumption 13W
Adapter input 100V240V AC50 Hz/60Hz
E8068U adapt output 12V±10%2A
EMC and safety EMC EN55022 B(CISPR 22B)
ESD defend and preserve IEC 61000-4-2 GR-1089-CORE
Laser eye safety
  • FDA 21CFR 1040.10 1040.11
  • EN(IEC) 60825-1
  • EN(IEC) 60825-2
Environment-protection standard RoHS
Environmental requirements Running temperature -10ºC~55ºC
Storage temperature -30ºC~60ºC
Operating humidity 10%~90% ,on-condensing
Storage humidity 5%~95% ,Non-condensing
Physical specifications Size L x W x H245 mm x 150 mm x 37mm
Weight <500g
Products Related to "4FE+2POTS+CATV+WIFI ONU"
About | E-Mail | Facility | Products | Tags | Solutions | News | Service and Support | Contact | Top