XDK-EOC24U-EOC slave

XDK-EOC24U-EOC slave
Product parameters
Keywords :
Product description
Product Overview
  EOC24U coaxial cable network unit is a Qualcomm Atheros 6400 chip scheme EOC (Ethernet over Coax) Slave which can be networking with EOC21T coaxial cable terminal (Master). They can build Layer-2 Ethernet transmit network through cable television coaxial cable and meanwhile have no influence on the pre-existing CATV signal transmit.
  EOC24U provides four 100M full-duplex Ethernet interfaces that can be simultaneously connected to terminals such as computer, set-top box of digital television, IP phone, etc. It supports QoS set up and can provide corresponding transmit guarantee of priority level for data stream of different service types. It supports bandwidth control. Maximum Uplink bandwidth of every EOC24U can be set up in order to prevent the attack to the whole coaxial transmit network when devices of other customer premises network go wrong or artificial attack happens. Encrypted transmit is also available to satisfy the service need of high reliability.
  EOC24U and EOC21T networking completely meets the requirement of Triple-play (integrating three networks into one) of broadcasting and television system. In actual networking, one single EOC21T can under-connects 253 EOC24U to realize relatively high convergence ratio. EOC24U occupies Low Frequency Band under 30MHz and has no collision with the current CATV system frequency which can decrease mutual interference.
Product Features

  • Provides four 10/100M autosensing Ethernet interfaces to connect devices such as computer, set-top box, IP phone, etc.
  • Provides 2 Cable interfaces to separately connect Uplink and Downlink Cable line
  • Built-in CATV signal split filter
  • Occupies Low Frequency Band under 30MHz. No influence on the pre-existing CATV signal
  • No user profile needed. Plug and play
  • Supports VLAN configuration
Product Specification

Item Description
Interface 4 10/100M autosensing Ethernet interfaces (Auto MDI/MDIX)
2 metric thread Cable interfaces
1 external power interface
Indicator Lan: 4
Cable: 1
Power: 1
Diagnosis: 1
Radio frequency Frequency range: 7.530MHz 
Maximum output power: 15 dBm
Receiving sensibility: -65 dBm 
Interface type: F type female connector socket
Output impedance: 75Ω
QoS IEEE 802.3, IEEE 802.3x, IEEE 802.3u Auto MDI (X) IEEE 802.1P,IEEE 802.1Q
Protocol TDMA/CSMA
Software attribute Supports VLAN, QoS
Performance Rate of Physical layer: 200Mbps 
Throughput of MAC layer: 100Mbps
Modulation mode OFDM 1024/256/64/16/8-QAM, QPSK, BPSK
Transmit distance > 1000 m
Encryption mode 128-bit AES encrypted
Power External 9VAC/800mA
Size (mm) 155 (length) * 108 (width) * 27 (height)
Weight 340 g
Operation temperature 040
Stock temperature -1055
Operation humidity 20%85% non-condensation
Stock humidity 10%90% non-condensation
Power consumption < 7W
Ordering information:
Type Product description
XDK-EOC24U-74 4FE port7410 chip.
XDK-EOC24UN-74 4FE port + WIFI7410 chip.
XDK-EOC24U 4FE port6400 chip.
Products Related to "XDK-EOC24U-EOC slave"
About | E-Mail | Facility | Products | Tags | Solutions | News | Service and Support | Contact | Top